Product Description

The impeller of the CZ sulfuric acid pump has a back blade or balanced hole structure to balance the axial force, while the residual axial force is absorbed by the bearing. The bearing is lubricated with thin oil, and the constant oil cup and visual oil window are used to control the lubricating oil level. A bushing is used to protect the shaft to prevent it from contact with the medium, also preventing corrosion and extending its service life and functionality. It is not necessary to dismantle the pipes at the inlet, outlet, and motor, due to the rear drag design. The entire rotor component can be pulled out from the rear for easy maintenance.

Before turning on the acid pump, both the suction pipe and the pump must be filled with liquid. After the pump is turned on, the impeller will rotate at high speed, and the liquid inside it will rotate with the blades. The liquid will then leave the impeller, being ejected by centrifugal force. As it gradually slows down in the pump casing diffusion chamber, the pressure will gradually increase. At the outlet, the discharge pipe will flow out. From the center of the blade, the liquid will be thrown to the surrounding area to form a low-pressure vacuum area containing neither air nor liquid. The pooled liquid will then flow into the pump through the suction pipe via atmospheric pressure on the surface of the blade, to be continuously sucked up and flowing out of the discharge pipe.

Pump Selection Guide

Export Slurry Pump, Chemical Pump, Acid Pump, Sand Pump

Our Company

Over the past 15 years, Minerco has offered our clients pumping solutions to trusted the world over. Our core team of professional engineers has perfected the centrifugal slurry pump design to give you the best product on the market. Our slurry pumps and spares are interchangeable with the Warman model and parts and come with a 100% risk-free guarantee. 

Our Promise- Reliable Quality & Professional Service

Your satisfaction is our number one priority. We welcome your feedback and are always looking for opportunities to improve our service. Our business philosophy is simple:

Quality control– We want to assure you of the perfection of our products, which is why we employ in-house quality management and process inspection team.

Fast, reliable service– We aim to meet the demands of all of our customers quickly and effectively. Our work is not complete until you are satisfied.

Supply support capacity– We understand no two operations are the same and that different jobs require different tools- that is why we take pride in the fact that it is well-stocked with a wide, diverse range of products.

Competitive pricing– We believe we offer the best product possible for the cost.

FAQ

Guarantee

Q1: What is your product range?
A: Our range of centrifugal pumps includes slurry pumps, gravel pumps, clean water pumps, sewage pumps, and chemical pumps, both as whole pumps and spares.

Q2: What’s your MOQ?
A: Our MOQ for a centrifugal pump is 1 set.

Q3: What are your accepted forms of payment?
A: T/T, L/C, Western Union, and PayPal.

Q4: How long is your lead time?
A: In general, lead times are seven working days for a slurry pump,15 working days for a water pump, and seven working days for pump spares.

Q5: What information I need to offer a quotation?
A: Liquid:___ ; Pump Capacity___m3/h ; PH:_____ ; Pump Head: ___m ; Specific of gravity___ ; Voltage ___V ; Frequency ___Hz

Q6: Are OEM parts available?
A: Yes. Please send a detailed drawing.

We are so confident in the quality of our pump and pump spares that we offer one of the only 100% free test and trial in the market.

We offer a free trial- if you are not satisfied after trying our Warman type pumps and spares, call us at +86 3125060076, and we will work with you to address your concerns.

If no resolution can be reached, simply return us the product, and we will refund your money, minus the shipping charges.